Assemblies

Channels

Channel sections used as heavy corners and framing.

1C-WLL

14 gauge channel used as corner angle. Holes through both flanges, and 1 set on face 1" from one flange.

1C-WLLH

Same as a 1C-WLL heavy duty corner angle except holes on 6" centers on ends of channel. Minimum width for the 1C-WLLH is 6".

1C-WLLH

Same as a 1C-WLL heavy duty corner angle except holes on 6" centers on ends of channel. Minimum width for the 1C-WLLH is 6".

1CD-WLL

Same as 1C-WLL except there is 2 rows of holes on face, 1" from each of the flanges.

CH-WLL

An 18 gauge channel with holes on each of the 2" side flanges (1.75" when width is 2"). Width "W" ranges from 2-12" and Length "LL" ranges f…

CH-WLL-3

Same as a CH-WLL but holes on side flanges are triple punched (2" centers).

CHD-WLL

Same as a CH-WLL with an extra row of holes on the face, 1" from one of the flanges.

CHD-WLLH

Same as a CH-WLL (18 gauge) with holes to end of channels starting 3" from one of the flanges. This option wouldnt be available until width …